Problem_广州市德一灯光有限公司

Problem

Problem

The lamp has a group of lamp bead not to shine, how to do?

Common reasons:
Turn on the lamp, with the multimeter a lamp bead measure, find the necrotic lamp bead, oneself again welding good lamp bead line.
Shake head lamp to walk normally oneself, but do not get control, how to do?

Common reasons:
We need to check out our lights address code is ok, different, different control station to broadcast address if the address code to check the signal wire is good, signal lines if it is okay, just turn on the lamp base to see the inside signal receiving port is loose, or directly in a signal receiving port, if the signal receiving port changed directly in the mainboard doesn't work.
Shake head lamp electrified power indicator light, other no reaction, the display screen does not work, the fan does not turn, the bulb does not work.How to do?

Common reasons:
Open the base, look at the power line, the line is no problem, change a power source.
Shake head lamp other functions are normal, prism or atomization can not play or play half, how to solve?

Common reasons:
Or to disassemble the lamp to check whether the circuit and motor are normal, if normal circuit and motor is to change the motherboard.
Shake head lamp other normal light is not off, there is leakage phenomenon.How to solve?

Common reasons:
First take apart the shell, first see is the stroboscopic turn off or blocking plate can not turn off, if it is optical turns, first check the motherboard to optical turns circuit and motor, circuit and motor if there is no problem directly change the motherboard.
Shake head lamp other function is normal, color or design are not unified, how to solve?

Common reasons:
Open the lamp shell, check the circuit and motor between the motherboard and the color plate or pattern plate, if there is no problem with the circuit and motor, try to change a motherboard, if the motherboard is not changed, then change hall and magnet.
Shake head lamp other function is normal, it is XY axis is shaken when ka-ka-ring, seem to have what card advocate, how to do?

Common reasons:
If there is no deformation, check the circuit and motor from the main board to the xy axis motor. For normal motor, it is quite difficult for us to turn it by hand after the lamp is energized. For broken motor, it is easy for us to turn it by hand.If there is no problem with the motor and circuit, check whether the reading plate and the optical coupler are ring. If the problem is not solved after the reading plate and the optical coupler are changed, change the motherboard.
When the headlamp is turned on, it will automatically extinguish the bubble within a few minutes. What should I do?

Common reasons:
First of all, open all the shell of the lamp by yourself, check all the fans inside, it may be that some fan does not work, leading to blister out, if the fan is normal, try to change a lamp lighter, if there is no problem, try to change a bulb, if the bulb or blister out, try to change the temperature control.The main reason for the blow-out may be that the fan, the laminator, the bulb, and the temperature control are broken